PDA

View Full Version : Travellall engine



travelall68
11-06-2009, 04:23 PM
My sweet 68 needs a engine! If you have one or know of someone that has one please let me know!

lindstromjd
11-07-2009, 12:06 AM
Where are you located? How big of an engine are you looking for? We need this kind of info so we know how to help.

travelall68
11-10-2009, 05:43 AM
I am in Oregon and looking for a 304

burtonone55
12-26-2009, 07:03 AM
Have you tried travelallparts.com or scoutparts.com? They are in washington, but if they don't have anything they might be able to help you find something.

Allan E.
12-28-2009, 08:22 AM
I am in Oregon and looking for a 304

Where in Oregon? There are probably SV series engines near you that you can get. I have a project down near Ontario along I-84, and I live up near the WA border north of that.

Manerd
01-26-2010, 06:13 PM
I have 2 266's in my garage and one 304 coming tomorrow along with my new 392. If your interested in the 304 let me know I dont know the condition yet. I live in St. Helens Oregon 30 min. away from downtown portland.

Allan E.
01-27-2010, 04:33 AM
I have 2 266's in my garage and one 304 coming tomorrow along with my new 392. If your interested in the 304 let me know I dont know the condition yet. I live in St. Helens Oregon 30 min. away from downtown portland.

Definitely interested in a runner. Already got a few to rebuild, but I need to do an engine swap. I need to find a place near Ontario/Payette to keep the truck while the swap is being done, probably 2 to 3 weekends. Got tools, got time... just don't have a place.

Manerd
02-01-2010, 03:30 PM
Definitely interested in a runner. Already got a few to rebuild, but I need to do an engine swap. I need to find a place near Ontario/Payette to keep the truck while the swap is being done, probably 2 to 3 weekends. Got tools, got time... just don't have a place.

I know the 266 I pulled from my scout ran but had a tick coming from one of the hydraulic lifters. The other 266 I bought from another member michaeldimock dont know too much about it other than supposedly it was rebuilt before he got it! The 304 I was told was a runner but cant verify it. The 304 is complete minus an alternator. 266's are mostly complete.

Allan E.
02-02-2010, 07:31 AM
I know the 266 I pulled from my scout ran but had a tick coming from one of the hydraulic lifters. The other 266 I bought from another member michaeldimock dont know too much about it other than supposedly it was rebuilt before he got it! The 304 I was told was a runner but cant verify it. The 304 is complete minus an alternator. 266's are mostly complete.

I really need to find a way to test any engine I get in unknown condition. There isn't a good place to do the work, and I have zero connections in the area, so there isn't any chance of a do-over. It doesn't have to be perfect, but I really need to make sure it runs somehow.

I should have a bell housing or a transmission I can rig up on a trailer. I guess I'll start putting one together.

Manerd
02-02-2010, 09:45 AM
I really need to find a way to test any engine I get in unknown condition. There isn't a good place to do the work, and I have zero connections in the area, so there isn't any chance of a do-over. It doesn't have to be perfect, but I really need to make sure it runs somehow.

I should have a bell housing or a transmission I can rig up on a trailer. I guess I'll start putting one together.

which engine were you refering to. The 304 has a T98 attached I'm sure It would not be too hard to drop it in just for testing purposes I've got a engine hoist. I'll give you all three engines for a good 4x4 tf727 if you have an extra one!:D

travelall68
02-12-2010, 05:27 PM
Manerd, what would you like for the 304?

Manerd
02-12-2010, 06:22 PM
I was about to add it to the classified ads here on BB for 300 with the T98 but if you dont need the trans. I'll sell the motor for 200. Its complete minus the alternator.

travelall68
02-14-2010, 04:35 AM
does it have a carb? To clarify, this one does not run but does it turn?

Manerd
02-16-2010, 10:30 AM
Sorry travellall68 I've been out of town for awhile without my laptop. The motor has sold already. I sold the block and crank alone for $150. He thought it would save him a little $ on freight shipping but I dont think he saved much, so now I have some extra parts. I do still have the carb. I might be able to track down another engine for you though, I have made a few good connections for parts.