Triangle Lift Kit

[Naked Bandit]

I am starting to mod my Scout II and a lift is the first thing I am going to do. I have already decided on the Trianlge 4" Lift. The question is: do I need new shocks or will my Ranchos work with the lift?

[1955-IH]

Is "Triangle" the brand of lift or is it a type of lift?

[Naked Bandit]

When I purchase the lift i will ask plenty of questions on what more I will need to do. I appreciate your input, fellas.

[AllenClark]

I just installed a 4" triangle spring lift on my 1980 scout. Definitely need longer shocks, shackles and brake lines. A drop pitman arm is also needed. Having some problems with the front driveline angle as well. Good luck!

[Jesse Ray]

Not the quality that you are looking at, but I installed a Rough Country 4" lift. The stock shocks were way off. It was amazing on how much they limited articulation.

New shocks installed, new hardware and bushings everywhere. The rear had shims to reduce pinion angle on the rear axle.

I have extended shackles and the front has some bump steer, mainly due to castor changes. However, the Scout still handled better after the changes, course after 30 years the rubber bushings were gone. And I am sure the rag joint and the ball joints are lose to fatigued as well.