mpowers
03-25-2009, 04:30 AM
I have a complete dana 44 rear axle 3.54 ratio. Everything except the drums. The gears look good except one spider gear is chipped. There is some surface rust on the outside edge of the ring gear and carrier, but there does not appear to be any pitting.
- $120
1 - 3.54 ring & pinion - $50
4 - scout II dana 44 rear axle shafts - 15 a peice
1 - complete underdash A/C unit - $50
1 - rear drive shaft from a 74 SII auto dana 20. - $25
I have everything to convert a front drum SII dana 44 or 30 to disc brakes. Does not include rotors. I would rather sell this all together $100. This includes the following:
- Spindles
- Outer C's
- dust covers
- caliper mounts
- hubs
- used superwinch locking hubs
1 - used AGR power steering box. This never worked right, I went back to a stock PS box. $25
Any shipping costs will be added to the price listed above.
mlpowers1@comcast.net
- $120
1 - 3.54 ring & pinion - $50
4 - scout II dana 44 rear axle shafts - 15 a peice
1 - complete underdash A/C unit - $50
1 - rear drive shaft from a 74 SII auto dana 20. - $25
I have everything to convert a front drum SII dana 44 or 30 to disc brakes. Does not include rotors. I would rather sell this all together $100. This includes the following:
- Spindles
- Outer C's
- dust covers
- caliper mounts
- hubs
- used superwinch locking hubs
1 - used AGR power steering box. This never worked right, I went back to a stock PS box. $25
Any shipping costs will be added to the price listed above.
mlpowers1@comcast.net