PDA

View Full Version : Wanted: 4spd Bellhousing


semperjim
03-08-2009, 12:24 PM
All, I am looking for a bellhousing: 4-spd to 4cyl (196) with mechanical clutch linkage. Please PM if you have one to part with for a reasonable price. Thanks
Allan E.
03-08-2009, 01:22 PM
All, I am looking for a bellhousing: 4-spd to 4cyl (196) with mechanical clutch linkage. Please PM if you have one to part with for a reasonable price. Thanks

The scout 800 and scout II bell housings for the 196 are different. The early models had a short input shaft, and the later models used the same bell housing as the V8 models. Both had mechanical linkages.
semperjim
03-09-2009, 01:16 PM
it would be for an 800
scoutnaround
03-16-2009, 04:40 PM
i have one but it was behind a 266 don't know if it work do you'r reseach and let me know i sell it at a fair price
Allan E.
03-31-2009, 11:33 AM
i have one but it was behind a 266 don't know if it work do you'r reseach and let me know i sell it at a fair price

4 cylinder 800 4 speed bell housings are unique. The one that fit the 266 will work with a 304, 345, or 392. The input shafts on the 4 cylinder setup is different, so the bell housing is shorter.

When IH stopped using the AMC 6, they standardized the transmissions and bell housings, but that was after the 800, during the Scout II years.